Methylcobalamin, often shortened to MeCbl, is a non-peptide organocobalt cobalamin cofactor containing a corrin ring system, a 5,6-dimethylbenzimidazole nucleotide, and a methyl group directly bonded to the cobalt atom. It is not a peptide, so it has no amino-acid sequence and should not be checked with peptide-specific standards.

Its commonly listed CAS number is 13422-55-4, its molecular formula is C63H91CoN13O14P, its average molecular weight is approximately 1,344.4 g/mol, and its monoisotopic exact mass is approximately 1,343.59 Da.[1]
The word “active” in the title refers to its role as an enzyme cofactor. It does not mean that a research-grade material has been shown to be safe or effective for use in people or animals.
Basic Identity
| Property | Value or Practical Meaning |
|---|---|
| Common name | Methylcobalamin, mecobalamin, or MeCbl |
| CAS number | 13422-55-4 |
| Molecular formula | C63H91CoN13O14P |
| Average molecular weight | Approximately 1,344.4 g/mol; monoisotopic exact mass approximately 1,343.59 Da[1] |
| Compound type | Non-peptide organocobalt cobalamin cofactor; not a peptide |
| Amino-acid sequence | Not applicable |
| Typical appearance | Red to dark-red solid; the batch COA should give the final specification |
| Purity | Batch-specific; use the COA rather than assuming one universal value |
| Light sensitivity | Light-sensitive; aqueous solutions are demonstrably photolabile |
| Storage | Keep sealed and protected from light at the temperature stated on the batch COA; use −20 °C when that is the stated product condition |
| Solubility | Depends on pH, temperature, buffer, and material form; confirm with the batch information and a small test before making a concentrated stock |
Why Methylcobalamin Is Called a Cofactor Form
Humans have two known B12-dependent enzymes. Methionine synthase uses methylcobalamin in the cytosol, while methylmalonyl-CoA mutase uses adenosylcobalamin in mitochondria.[2]
This means methylcobalamin is one cofactor form of B12, not the only biologically active form. Adenosylcobalamin is also a cofactor, but it works with a different enzyme and cannot be treated as a direct replacement in a methionine synthase assay.
A methyl group is bonded directly to the cobalt atom in methylcobalamin. In aqueous solution near neutral pH, free methylcobalamin is predominantly in a base-on state, with 5,6-dimethylbenzimidazole serving as the lower axial ligand.
A crystal structure of bacterial methionine synthase showed that, after the cofactor binds the enzyme, a histidine from the protein replaces this lower ligand.[3] This structural detail helps explain why the same cofactor can behave differently when it is free in solution and when it is held inside an enzyme.
How Methionine Synthase Uses Methylcobalamin
Methionine synthase transfers a methyl group from 5-methyltetrahydrofolate to homocysteine. The products are tetrahydrofolate and methionine.
Methylcobalamin works as a temporary methyl-group carrier inside the enzyme.[4]
The reaction can be understood in two simple steps:
- First step: enzyme-bound methylcobalamin gives its methyl group to homocysteine, forming methionine and cob(I)alamin.
- Second step: cob(I)alamin receives a new methyl group from 5-methyltetrahydrofolate, which restores methylcobalamin and releases tetrahydrofolate.
Cob(I)alamin is easily oxidized. If it changes to cob(II)alamin, methionine synthase stops cycling until it is reactivated.
In human enzyme systems, methionine synthase reductase (MTRR) can supply electrons from NADPH, and S-adenosylmethionine supplies the methyl group needed to restore the active cofactor state.[5]
Role in One-Carbon Metabolism
The methionine synthase reaction connects the folate cycle with the methionine cycle. It uses 5-methyltetrahydrofolate, returns tetrahydrofolate to the folate pool, and produces methionine.
The methionine produced can subsequently enter the methionine cycle and be converted to S-adenosylmethionine by methionine adenosyltransferase, providing the methyl donor for numerous cellular methylation reactions.[6]
Homocysteine can also enter the transsulfuration pathway. Methionine synthase therefore affects how homocysteine is divided between remethylation and transsulfuration, but it is not accurate to say that every reaction in all three pathways passes through this one enzyme.
Any claim about pathway changes should name the model used, such as a purified enzyme, a cell-free system, cultured cells, or a standard laboratory animal model. A pathway result from one model should not be presented as a proven effect in another model.
How Cells Process Different B12 Forms
Different cobalamin forms are not freely interchangeable inside cells. The human MMACHC protein removes the cyano group from cyanocobalamin by reductive decyanation, producing a cobalamin intermediate that can enter later processing steps.[7]
Purified-protein studies show that MMACHC directly dealkylates methylcobalamin and adenosylcobalamin, while cultured-cell studies support a role for MMACHC-dependent processing of internalized alkylcobalamins. This early processing helps route newly internalized or trafficking-associated cobalamin toward the cofactor forms needed by different enzymes.
The enzyme-bound methylcobalamin in methionine synthase is protected within the protein active site and is not freely accessible for dealkylation by MMACHC.[8]
For this reason, adding a reducing agent such as DTT to cyanocobalamin should not be described as a complete conversion into methylcobalamin. Decyanation, reduction, protein transfer, enzyme loading, and methylation are separate steps.
A cell-free assay should use the cobalamin form named in the validated method unless the full processing system has been rebuilt and tested.
Comparison of Common Cobalamin Forms
| Form | Upper Group | Main Research Role | Important Note |
|---|---|---|---|
| Methylcobalamin | Methyl | Cofactor form used by methionine synthase | Light-sensitive and not a peptide |
| Adenosylcobalamin | 5′-Deoxyadenosyl | Cofactor form used by methylmalonyl-CoA mutase | Not a direct substitute for methylcobalamin in an MTR assay |
| Cyanocobalamin | Cyano | Processed cobalamin precursor in cell studies | Requires decyanation before it can enter cofactor-forming pathways; photolabile |
| Aquo/hydroxocobalamin | Water or hydroxide, depending on pH | Intermediate or precursor used in some research systems | Its exact form changes with solution conditions |
These forms also differ in light stability. In one controlled UVA study at pH 7.4, all four tested cobalamin forms (methylcobalamin, adenosylcobalamin, cyanocobalamin, and hydroxocobalamin) were photolabile, with hydroxocobalamin showing the greatest stability under those specific conditions. Cyanocobalamin may be more photostable than methylcobalamin or adenosylcobalamin under some conditions, but it remains photolabile and should not be described as light-insensitive.[9]
Laboratory Handling
Laboratory Parameters Only: The following points apply only to research preparation and testing. They must not be converted into human or veterinary dosing instructions.
- Protect it from light. Use amber or foil-wrapped containers and limit light exposure during weighing, mixing, storage, incubation, and analysis.
- Follow the batch storage instruction. If the COA states −20 °C, store the sealed material at −20 °C and let the closed container warm before opening to reduce condensation.
- Do not set one shelf life for every solution. Solution stability depends on pH, buffer, temperature, light, oxygen, concentration, and freeze-thaw history.
- Test solubility before making a concentrated stock. Start with a small amount in the planned water or buffer. Do not claim that every batch will dissolve at the same maximum concentration.
- Do not make unsupported solvent claims. An article should not state that DMSO always removes the methyl group unless that effect has been shown under the exact test conditions.
- Use one complete assay method. Do not combine the DTT level from one paper, the cobalamin form from another, and the incubation time from a third paper and call the result a standard protocol.
Published stability studies show that methylcobalamin can break down under light and under strongly acidic or alkaline conditions. One study found that methylcobalamin was most stable near pH 5 in the tested system, and that degradation increased markedly at both strongly acidic and alkaline pH values as well as under light stress.
The rate depends on the test setup, so a fixed “safe light-exposure time” should not be claimed without data from the actual method.[10]
Preparing a Research Stock Solution
Use the molecular weight and final volume to calculate the theoretical molar concentration. This calculation assumes neat methylcobalamin (MW 1,344.4 g/mol) at 100% assay on the stated material basis.
Adjust the result for the actual assay value, water or hydrate content, and any excipients when applicable.
Theoretical concentration (mM) = mass (mg) × 1,000 ÷ [molecular weight (g/mol) × final volume (mL)]
For example, 5 mg of methylcobalamin (assuming 100% assay, MW 1,344.4) in a final volume of 10 mL gives:
5 × 1,000 ÷ (1,344.4 × 10) = approximately 0.372 mM
This calculation only shows the theoretical concentration. It does not prove that the material is fully dissolved or stable.
The solution should be checked for visible particles, protected from light, and tested with a suitable analytical method when concentration accuracy matters.
Reading a Methylcobalamin COA
A certificate of analysis describes one tested batch. It does not prove that the material is safe or effective for use in people or animals.
- Identity: Mass spectrometry, UV-visible spectroscopy, infrared spectroscopy, or another suitable test may support identity. A mass result must be read with its ion type, charge, isotope pattern, and possible adducts.
- HPLC purity: HPLC area percentage shows the relative amount of detected peaks under one method. It is not automatically the same as absolute mass content.
- Assay or content: A true content result should state the method, reference standard, calculation basis, and whether the result is reported as-is, dried, or corrected for water.
- Water and residual solvents: These need separate methods and batch limits. They should not be assumed from an HPLC purity result or copied from a generic peptide specification.
- Degradation products: Because methylcobalamin is light-sensitive, sample preparation and instrument handling should control light exposure.
A sound analytical procedure should be suitable for its purpose and should address factors such as specificity, accuracy, precision, range, and detection or quantitation limits when those factors apply.[11]
Research Use Only Disclaimer
Research Use Only: All SaiyanMed products are intended solely for controlled laboratory in-vitro research and are not intended, labeled, or supplied for human or veterinary use. This article is provided for informational context regarding published research findings and general analytical and handling considerations, and does not constitute medical, clinical, veterinary guidance or treatment advice.